SKU: id23761

Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN1263 (Class: 3, Pk Grp: II), Part C: Non Hazardous

Carboline Carboguard 890 GF

A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets.

Available in 5 Litres. Tintable to most RAL and BS shades.

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£110.75

Inc VAT £132.90

PRODUCT DETAILS

Carboline Carboguard 890 GF is a glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets.

Best Uses

Carboline Carboguard 890 GF is self-priming providing glass reinforcement to improve internal film strength, hardness, impact, and abrasion resistance. This coating is often used in severe service above or below the water line, in marine applications.

Excellent chemical resistance
Surface tolerant characteristics for less severe applications
Low-temperature version: Carboline Carboguard 890 LT GF
Self-priming and primer/finish capabilities
Excellent abrasion resistance & hardness
VOC compliant to current AIM regulations
Non-skid service with optional fillers

Application

Apply via conventional spray, airless spray or brush for touch up or striping welds only. Prepare substrate as per data sheet requirements. Carboline Carboguard 890 GF may be coated with acrylics, epoxies or polyurethanes depending upon exposure and need. Contact our technical team for suitable systems depending on your requirements.

TECHNICAL

Approvals and Certifications

NORSOK M-501 System 4 approved
NORSOK M-501 System 7a approved
NORSOK M-501 System 7b approved
NORSOK M-501 System 7c approved

Technical Info

Suitable for heat up to:

Continuous: 300°F (149°C)
Non-Continuous: 350°F (177°C)

Components:	Three Pack
Type:	Cycloaliphatic Amine Epoxy with Glass Reinforcement
Finish:	Flat
Stock Colours:	Call to check. Use only factory made colors for immersion applications.
Tintable:	Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content:	192 g/L
Volume Solids:	77%
Suitable Substrates:	Steel, Galvanised Steel, Concrete, CMU and previously painted surfaces
Application Method:	Conventional Spray or Airless Spray, Brush for touch up or welds only
Theoretical Coverage:	30.3 m2 per litre at 25 microns 3.8 m2 per litre at 200 microns 1.5 m2 per litre at 500 microns
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):	203 - 508 microns per coat
Induction Time:	-
Pot Life:	3 hours at 24°C

Overcoatable:	8 hours at 16°C
Fully Cured:	2 days at 20°C
Cleaner / Thinner:	Carboline Thinner No.2
Shelf Life:	Part A: 36 months at 24°C Part B: 15 months at 24°C Glass Flake Additive – 60 months at 24°C
Packaging:	Available in 5 Litres