Zinc Phosphate Primers - Two Pack

A 2 pack, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

A fast curing, two component, high solids, high build zinc phosphate polyurethane primer / finish for in shop application to steel.

A high build polyamide cured zinc phosphate epoxy primer a general purpose epoxy primer/coating for atmospheric conditions.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.

Formally Amercoat 385 PA. A high build poly amide cured zinc phosphate epoxy primer.

A 2 pack amine cured epoxy coating for new construction where short dry to handle and over coating times are required.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A 2 pack epoxy zinc phosphate primer suitable for the anti corrosive protection of carbon steel surfaces.

A 2 pack high solids rapid drying zinc phosphate epoxy primer and build coat. Cures at low temperatures down to -5°C.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A 2 pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.

A two pack epoxy anti-corrosive primer for application to steel which is clean and free from scale and / or rust.

A self-priming, two-component, high build epoxy paint containing zinc phosphate.

A zinc phosphate pigmented 2 pack epoxy, temporary protective primer for steel surfaces. Highways Agency No.110

A 2 pack zinc phosphate epoxy wet blast primer for application to surfaces which have been prepared by wet abrasive blasting.

A two-pack, solvent-based epoxy resin, containing rust-inhibitive pigments, lead and chromate free.

A multi-functional low temperature curing phenalkylated zinc phosphate coating for the protection of carbon steel.

A high build polyamide low temperature tintable zinc phosphate epoxy shop primer/coating for atmospheric conditions.

A two pack epoxy, high solids, zinc phosphate primer or primer/finish for steelwork.

A fast curing epoxy primer for use with International 3200 product series.

An epoxy primer which provides optimised control where thin film application is required.

A two component primer which is ideal for speeding up production and throughput.

A 2 pack, high gloss, low VOC, high solids, fast curing, acrylic polyurethane primer / finish pigmented with zinc phosphate.

Provides rapid cure and overcoating even under low temperature conditions.

A rapidly recoatable primer for epoxy and polyurethane systems exposed to abrasion and chemical stress.

A zinc phosphate 2 pack epoxy paint for use in corrosive environments within a Hempel coatings system.