Carboline Carbozinc 11
Carboline Carbozinc 11 is a time tested corrosion resistant coating that provides excellent galvanic corrosion protection to steel in some of the harshest environments.
For over 50 years, Carboline Carbozinc 11 has been the industry standard for high performance inorganic zinc protection on steel structures worldwide.
Best Uses
Carboline Carbozinc 11 is formulated for use in C3, C5, C5 immersion and CX environments. This product is formulated for use as a steel primer for tank linings and high temperature coatings.
Suitable for use within the following markets: Commercial & Architectural, Bridge & Highway, Metals & Mining, OEM, Commercial Marine, Oil & Gas Midstream, Power - Conventional, Oil & Gas Upstream, Pharmaceutical, Water & Wastewater, Rail, Pulp & Paper and Petrochemical industries.
This inorganic zinc coating benefits from rapid curing and will be dry to handle in 45 minutes at 16°C. Carboline Carbozinc 11 can also cure at low temperatures down to -18°C.
- High zinc loading
- Very good resistance to salting
- May be applied with standard airless or conventional spray equipment
- Will cure at temperatures as low as -18°C
- VOC compliant in many areas
Without using a topcoat, this product can withstand a maximum service temperature of 400°C continuously. If used with one of Carbolines recommended high temperature resistant topcoats, systems can withstand 540°C continuous temperatures.
Suitable to be topcoated with Carboline waterborne acrylics, epoxies, polyurethanes, high-temperature silicones and other coatings.
Application
Ensure to fully mix both components as per data sheet guidance prior to use. Thin as per recommendations in application guide. Apply via airless or conventional spray. Use a brush for touch up of small areas only.
Approvals & Features
- Meets Class B slip co-efficient and creep testing criteria for use on faying surfaces
- Meets SSPC Paint 20 Type I, Level 1 for zinc content
- Meets FDA requirements
Technical Info
| Components: | Two Pack |
| Type: | Solvent Based Inorganic Zinc |
| Finish: | Flat |
| Stock Colours: | Green |
| Tintable: | No |
| VOC Content: | 492 g/L |
| Volume Solids: | 62% |
| Suitable Substrates: | Steel |
| Application Method: | Brush, Conventional Spray, Airless Spray |
| Theoretical Coverage: | 24.5m2 per litre at 25 microns DFT 8.2 m2 per litre at 75 microns DFT |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | 51 - 76 microns |
| Induction Time: | - |
| Pot Life: | 8 Hours at 24°C |
| Dry To Handle: | 45 minutes at 16°C |
| Dry To Topcoat: | 24 hours at 16°C |
| Cured For Immersion: | 3 days at 16°C |
| Cleaner / Thinner: | Use Carboline Thinner 21 or Isopropyl Alcohol. |
| Shelf Life: | 1 year minimum in original unopened containers. |
| Packaging: | Available in 4 Litres - Larger sizes are available on request, please contact us for further information. |