Centrecoat Polyurethane Floor Paint

Centrecoat Polyurethane Floor Paint is a single pack, durable, polyurethane floor coating that gives good resistance to most chemicals expected in garages and warehouses.

00-A-05 stock colour available for next day delivery. Other colours by special order.

Best Uses

Centrecoat Polyurethane Floor Paint is resistant to splashing with petrol, lubricating oils, mild alkalis, dilute mineral acids (including battery acids), grease and water. Provides a smooth finish with a high sheen.

This single pack durable floor paint is ideal for garages and small warehouses.

Application

Concrete should be clean, dry and free from dust, dirt, grease and other contaminates etc. All surfaces to be coated should be dry (the concrete should have a moisture content below 6%. Power–floated floors should be abraded/acid etched to provide a key for the coating.

For Previously Painted Floors:
As with all coating applications, suitable pre-treatment of the floor is of the utmost importance. Old paint especially with suspect adhesion or of an unknown type should be completely removed. Some paints however may still lift, be softened, or cause poor inter-coat adhesion when this system is applied on top of them. So, it is always advisable to check for suitability and defects by undertaking small-scale trials. If the old paint is satisfactory, clean and abrade the surface in the normal way.

For Heavily Contaminated Floors:
Centrecoat Polyurethane Floor Paint will not adhere satisfactorily to heavy deposits of grease, oils etc. It will be necessary to mechanically abrade the floor to remove the excess contamination.

For New Floors/Uncoated Surfaces:
For most surfaces two coats should be sufficient. The first coat should be thinned 20%-30% to act as a sealer using Centrecoat HB Anti-Corrosive Cladding Paint Thinners. This should be followed by one or two coats of the Centrecoat Polyurethane Floor Paint (unthinned). It is important to allow overnight drying between the coats. Apply via brush or roller.