Coo-Var Hammercote Smooth Aerosol, 6 x 400ml

Coo-Var Hammercote Smooth Enamel is a fast drying coating giving a smooth enamel finish to metal objects.

Best Uses

Coo-Var Hammercote Smooth Enamel is suitable for use on wrought iron, radiators, fridges, cars, bikes, boats, trailers, fences, railings, engines, spades, tools or any metalwork where a fast drying finish is required straight on to the surface.

Application

Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Bare steel should be free from dust, rust and scale. Blast cleaning to SA 2½ is recommended. If blast cleaning is impractical, mechanical cleaning should be employed, but hand cleaning does not clean the steel to the required degree. Any oil or grease should be removed with solvent before de-rusting. Where blast cleaning is carried out after assembly, special attention must be paid to edges, corners, nuts, bolts welds, etc. Welds should, if necessary, be ground and all weld spatter, slag etc. must be removed.

Mix well before use.

PRECEDING COAT:
Direct to prepared metal or Teamac Rapidry Zinc Phosphate Primer.

SUBSEQUENT COAT:
Coo-Var Hammercote Smooth Enamel

Apply a minimum of 2 coats.