FLAG Anti Corrosive QD Metal Primer

A high build quick air-drying oxide primer for use on ferrous metals.

Available in 2.5 Litres

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£19.52

Inc VAT £23.42

PRODUCT DETAILS

Flag Anti Corrosive QD Metal Primer is a high build quick air-drying oxide primer for use on ferrous metals. Provides good protection prior to over coating with most solvent based finishing products.

Best Uses

Flag Anti Corrosive QD Metal Primer is suitable for a wide variety of applications where speed and ease of application are required. Compatible with Flag Hammer Finish and Flag Smooth Metal paints.

Suitable for use on internal and external structural steel.

Application

The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease and oil. Apply via brush or conventional / airless spray at a rate of 12 - 15 m2 per litre.

TECHNICAL

Components:	Single Pack
Type:	Solvent Based Air Drying Oxide Primer
Finish:	Matt
Stock Colours:	Red and Grey
Tintable:	No
VOC Content:
Volume Solids:	60%
Suitable Substrates:	Industrial internal and external structural steel and ferrous metals
Application Method:	Brush, Conventional or Airless Spray
Theoretical Coverage:	12 - 15 m2 per litre
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time:	-
Pot Life:	-
Touch Dry:	15 minutes at 20°C
Overcoatable:	After 4 hours at 20°C
Fully Cured:
Cleaner / Thinner:	Xylene
Shelf Life:	2 years minimum in original unopened containers.
Packaging:	Available in 2.5 Litres