Hempel Hempadur 47300
Hempel Hempadur 47300 is a two-component epoxy paint, which cures to a hard and tough coating with good resistance to abrasion and seawater. Conforms to NORSOK M-501, Ed. 6, system no. 1.
Best Uses
Hempel Hempadur 47300 is best used as a midcoat epoxy and self-primed high performance coating system for atmospheric exposure. HEMPADUR 47300 is intended for all year application down to -10°C/14°F and for in-shop applications where fast re-coating and handling is required. For longer overcoating intervals, the MIO version of this product, shade 12430, is recommended. Contact Promain Technical for details.
Application
New steel: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Abrasive blasting to Sa 2½ (ISO 8501-1:2007). For temporary protection, if required, use a suitable shop primer. All damage to shop primer and contamination from storage and fabrication should be thoroughly cleaned prior to final painting. For repair and touch-up use: HEMPADUR 47300.
Repair and maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Clean damaged areas thoroughly by power tool cleaning to St 3 (ISO 8501-1:2007) (minor areas) or by abrasive blasting to min. Sa 2, preferably to Sa 2½ (ISO 8501-1:2007). Improved surface preparation will improve the performance of the product.
Other substrates: Contact Hempel or Promain Technical.
Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. Use only where application and curing can proceed at temperatures above: -10°C/14°F. The temperature of the paint itself should be above: 15°C/59°F. In confined spaces, provide adequate ventilation during application and drying.
Certificates & Approvals
- Complies with ISO 12944-6 C4, C5-I and C5-M.
- Complies with UNE 48295:2003
- Norsok M-501 system no. 1 (Pre-Qualified)
- Norsok M-501 system no. 2B
Notes
- Has a tendency to yellow after application. This will have no influence on the performance.
Technical Info
| Components: | Two Components |
| Type: | Epoxy Paint |
| Finish: | Semi-Flat |
| Stock Colours: | Light Grey - 12170 |
| Tintable: | Yes, Other shades according to assortment list - Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | 183 g/l [1.5 lbs/US gallon] |
| Volume Solids: | 83 ± 1% |
| Suitable Substrates: | Steel |
| Application Method: | Airless spray / Brush |
| Theoretical Coverage: | 4.1 m2/l [164.4 sq.ft./US gallon] - 200 micron/8 mils |
| Wet Film Thickness (WFT): | 200 micron [8 mils] |
| Dry Film Thickness (DFT): | 160 micron [6.4 mils] |
| Induction Time: | - |
| Pot Life: | 1.5 hour(s) , 20°C/68°F |
| Touch Dry: | 3 hour(s) , 20°C/68°F |
| Overcoatable: | According to separate application instructions |
| Fully Cured: | 7 day(s) , 20°C/68°F |
| Cleaner / Thinner: | Thinner: 08450 (5%) / 08450 (max 20%), Clean tools with Hempel Tool Cleaner 99610 or Hempel Thinner 08450 |
| Shelf Life: | 3 years for BASE and 1 year (25°C/77°F) for curing agent from time of production |
| Packaging: | Available in 20 Litres |