SKU: ID21339
UN1263 (Class: 3, Pk Grp: III)

Hempel Hempatex Enamel 56360

A finishing coat based on acrylic resin and non chlorinated plasticizer for optimum gloss and colour retention.
Available in 5 and 20 Litres. Tintable to many RAL and BS shades.
* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
3. Select a Qty
As low as:
£46.96
Inc VAT £56.35
PRODUCT DETAILS

Hempel Hempatex Enamel 56360 is a finishing coat based on acrylic resin and non chlorinated plasticizer for optimum gloss and colour retention. Resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils.

Best Uses

Hempel Hempatex Enamel 56360 is formulated as an interior and exterior finishing coat in HEMPATEX systems in moderately to severely corrosive environment.

Application

Preparation For New Steel: According to specification.
Preparation For Repair and Maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water cleaning. Remove all rust and loose material by abrasive blasting or power tool cleaning. Dust off residues. Touch up bare spots to full film thickness.

Apply only on a dry and clean surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.

If a skid-proof surface is desired, sprinkle while paint is still wet HEMPEL'S ANTI-SLINT 67500 evenly on the first coat of: Hempel Hempatex Enamel 56360. When the paint is dry, sweep up surplus grit and apply a second coat of: Hempel Hempatex Enamel 56360. Anti-skid properties can be obtained by mixing 1.0 kg of Hempel Anti-Slip Beads 67420 into: 20 litres Hempel Hempatex Enamel 56360.

TECHNICAL
Components: Single Pack
Type: Acrylic Resin
Finish: Gloss
Stock Colours: 10000 White
Tintable: Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: 594 g/L
Volume Solids: 32%
Suitable Substrates: For use within a Hempatex System
Application Method: Airless spray / Air spray / Brush
Theoretical Coverage: 9.1 m2 per litre in 35 microns
Wet Film Thickness (WFT): 100 microns
Dry Film Thickness (DFT): 35 microns
Induction Time: -
Pot Life: -
Surface Dry: 1 hour at 20°C
Overcoatable: According To Specification
Thorugh Dry: 1 hour at 20°C
Cleaner / Thinner: HEMPEL'S THINNER 08080
Shelf Life: 5 years (25°C/77°F) from time of production
Packaging: Available in 5 and 20 Litres
Customer Questions
No Questions
Did you find what you were looking for?

RELATED PRODUCTS

Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.