Jotun Hardtop Pro
Jotun Hardtop Pro is a 2 pack, high solids, high gloss chemically curing acrylic polysiloxane topcoat for use in offshore environments. Cures down to 0°C.
Best Uses
Jotun Hardtop Pro benefits from excellent gloss and colour retention while having very good mechanical properties and chemical resistance. Jotun Hardtop Pro is ideal for use as topcoat in atmospheric environments.
The product is fully recoatable at any stage of curing and will cures down to 0°C. The product does not contain isocyanates, neither does it generate diisocyanates during hotwork / welding or fire.
Jotun Hardtop Pro is iudeally suited for offshore structures, tank farms, refineries, power plants, bridges and buildings. It is also suitable for a wide range of industrial structures.
In marine environments, Jotun Hardtop Pro is recommended for topside, deck and superstructure. This product is pre-qualified in accordance with NORSOK M-501, Edition 6, System 1.
Application
Apply as a topcoat within a suitable system. Apply product via air or airless spray, brush or roller as per product data sheet. Clean up with Jotun Thinner No 10.
| Components: | Two Pack |
| Type: | Acrylic Polysiloxane |
| Finish: | High Gloss |
| Stock Colours: | Just tints |
| Tintable: | Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | |
| Volume Solids: | 65% |
| Suitable Substrates: | Previously coated substrates as part of a system |
| Application Method: | Brush, Roller, Air or Airless Spray |
| Theoretical Coverage: | 13 m2 per litre |
| Wet Film Thickness (WFT): | 75 microns |
| Dry Film Thickness (DFT): | 50 microns |
| Induction Time: | 15 minutes at 23°C |
| Pot Life: | 3 hours at 23°C |
| Touch Dry: | 7 hours at 10°C |
| Overcoatable: | After 20 hours minimum at 10°C |
| Fully Cured: | 10 days at 10°C |
| Cleaner / Thinner: | Jotun Thinner No 10 |
| Shelf Life: | 1 year in original unopened containers. |
| Packaging: | Available in 5 and 20 Litres |