Jotun Vinyguard Silvergrey 88

A 1 pack physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.

Available in 5 and 20 Litres

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£39.31

Inc VAT £47.17

PRODUCT DETAILS

Jotun Vinyguard Silver Grey 88 is a one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates.

Best Uses

Jotun Vinylguard Silver Grey 88 is recommended as a marine coating for topside, deck and superstructure carbon steel substrates. Also suitable as a tie coat for anti-fouling systems. Jotun Vinylguard Silver Grey 88 is suitable for continuous temperatures of 60°C and 40°C if immersed in sea water.

Application

Prepare carbon steel to SA 2 1/2 and ensure all surfaces are clean, dry and free from any contamination. For previously coated substrates ensure a compatible coating is used and that it is clean and dry as well as undamaged. Apply using an air or airless spray. Use a brush to apply product for stripe coating and small areas. Check to ensure the DFT is allowed for. Use a roller to apply on small areas. Roller is not recommended for first primer coat. Care must be taken to achieve the specified dry film thickness.

When applicable, products primarily meant for use as primers or anti-foulings may have slight colour variations from batch to batch. Such products may fade and chalk when exposed to sunlight and weathering.

TECHNICAL

Approvals

When used as part of an approved scheme, this material has the following certification:

Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with IMO 2010 FTP Code Ch. 8
NATO Approval No. 8010-99-212-5888 (5 Litres)

Finish:	Metallic.
Stock Colours:	Aluminium, Aluminium Red Tone
Tintable:	No
VOC Content:	551g per Litre
Volume Solids:	38%
Suitable Substrates:	Properly prepared carbon steel substrates
Application Method:	Air Sprayer, Airless Sprayer, Brush or Roller
Theoretical Coverage:	10.9 - 3.8m2 per litre depending on system
Dry Film Thickness (DFT):	35 - 100 microns per coat.
Touch Dry:	20 minutes at 10°C.
Recoatable:	3 hours minimum
Cleaner / Thinner:	Jotun Thinner No.7
Shelf Life:	48 months at 23°C
Packaging:	5 and 20 Litre tins