Sherwin Williams Macropoxy C251 - Formerly Leighs Epigrip C251

A 2 pack epoxy pheonlic coating for the internal coating of storage tanks and vessels.

Available in 5 Litres

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£223.91

Inc VAT £268.69

PRODUCT DETAILS

Sherwin Williams Macropoxy C251 - Formerly Leighs Epigrip C251 is a 2 pack epoxy phleonic coating for the internal coating of storage tanks and vessels.

Approved for NATO use.

Best Uses

Suitable for insulated external carbon or stainless steel surfaces including equipment and pipework. Can be used up to 180°C operating temperature (dry heat). Maximum temperature under insulation 150°C.

Application

Blast clean ferrous surface to Sa2 1/2 BS EN ISO 8501-1:2007. Average surface profile in the range of 50-75 microns.

For Stainless Steel all surfaces should be flash blasted using non metallic abrasives and coated with Macropoxy C251 within 4 hours of blasting. Ensure all surfaces are clean, dry and free from surface contaminants. Can be applied via airless spray, conventional spray or brush.

TECHNICAL

Approvals

NATO Approval No. 8010-99-284-3464 (White 5 Litres)

Technical Info

Components:	Two Pack
Type:	Epoxy phenolic
Finish:	-
Stock Colours:	White, Buff
Tintable:	No
VOC Content:	235gms/litre
Volume Solids:	74 ± 3%
Suitable Substrates:	Steel
Application Method:	Brush, Airless Spray or Conventional Spray
Theoretical Coverage:	6 m2/ltr
Wet Film Thickness (WFT):	160 microns
Dry Film Thickness (DFT):	125 microns
Induction Time:	-
Pot Life:	2 hours @ 23°C
Touch Dry:	4 hours at 23°C
Overcoatable:	24 hours at 23°C
To Handle:	12 hours at 23°C
Cleaner / Thinner:	Thinner No.5
Shelf Life:	18 months from date of production unopened or 'use by' date where specified
Packaging:	Available in 5 Litres