PPG PhenGuard 965

A 2 pack, high build, amine adduct-cured novolac phenolic epoxy for offshore, marine and chemical / petrochemical sectors.

Available in 20 Litres

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£570.00

Inc VAT £684.00

PRODUCT DETAILS

PPG PhenGuard 965 is a two component, high build, amine adduct-cured novolac phenolic epoxy coating for offshore, marine and chemical / petrochemical sectors.

Best Uses

PPG PhenGuard is formulated as a chemical resistant tank lining. For detailed information on resistance and resistance notes please contact us.

Excellent resistance to a wide range of organic acids, alcohols, fats (regardless of free fatty acid content) and solvents
Maximum cargo flexibility
Low cargo absorption
Easy to clean
Good resistance to hot water
Can be applied and cures at temperatures down to 5°C (41°F)
Good application properties, resulting in a smooth surface

Application

Steel should be blast cleaned in situ to at least ISO 2 1/2 with a blasting profile of between 50-100 microns. Steel must be free from rust, scale, shop primer and any other contamination. Please allow for tins induction time of 10 minutes at 15°C.

Minimum curing time of PhenGuard 965 system before transport of cargoes is 3 months according to data sheet. For transport of methanol and vinyl acetate monomer, a hot cure is required which cannot be substituted by a service period of 3 months with non-aggressive cargoes. Adequate ventilation must be maintained during application and curing. When used as a primer under solvent free tank linings, the DFT must be limited to a maximum of 100 microns (4 mils).

TECHNICAL

Systems

PPG PhenGuard 965 is used within the following Sika systems:

PPG 3329 System - PhenGuard 965 Tank Coating System

See Data Sheets tab for System sheet downloadable PDF.

Technical Info

Type:	Solvent Based
Finish:	Eggshell
Stock Colours:	Off White, Pink, Grey
Tintable:	No
VOC Content:	329.0 g/l
Volume Solids:	68%
Suitable Substrates:	Steel
Application Method:	Air or Airless Spray
Theoretical Coverage:	6.8m2 per litre for 100 microns 5.4m2 per litre for 125 microns
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):	500 - 1500μm
Pot Life:	2 hours at 20°C
Touch Dry:	18 hours at 1500 microns at 20°C
Recoatable:	8 hours - 14 days at 20°C
Full Cure	3 days at 20°C
Cleaner / Thinner:	Clean with PPG Thinner 91-92
Shelf Life:	At least 12 months when stored cool and dry
Packaging:	20 Litres