PPG Sigma Vikote 56
PPG Sigma Vikote 56 is a modified acrylic finish designed to provide the finishing coat to surfaces above water level. Splash resistant to water and mild chemicals making it ideal for use in the marine environment, above water.
Sigma Vikote 56 is available in white, although most other decorative colours are available on request.
Best Uses
PPG Sigma Vikote 56 is ideal for use in areas close to water and works to resist weathering and retain gloss and colour retention at the same time. Sigma Vikote 56 can be used on all surfaces that have been previously coated with chlorinated rubber, vinyl or acrylic coatings.
Application
PPG Sigma Vikote 56 can be applied using brush, roller or airless spray and has a fast drying time of just 1 hour to touch. After an 8 hour interval you will be able to apply a second coating that produces a glossy finish.
Surface and Environment
PPG Sigma Vikote 56 can be used internally or externally on a variety of different surfaces including metal, wood, plastic and concrete, providing they have been already coated with a suitable undercoat.
Notes
- Finish coat for above water areas.
- Good gloss and colour retention.
- Resistant to water and splash of mild chemicals.
- Fast drying.
- Can be applied at low temperatures, down to -10°C
Systems
PPG Sigma Vikote 56 is used within the following PPG systems:
- PPG 3102 System - Systems For Boot Top and Topside
- PPG 3103 System - Systems For Decks
- PPG 3104 System - Systems For Superstructure and Deck Fittings
See Data Sheets tab for System sheet downloadable PDF.
Technical Info
| Components: | Single Component |
| Type: | Modified Acrylic Finish |
| Finish: | Gloss |
| Stock Colours: | White and other colours (see SIGMACARE Shade Card) |
| Tintable: | Yes, to most BS and RAL shades. Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | 538.0 g/kg |
| Volume Solids: | 35 +/- 2% |
| Suitable Substrates: | Can be used on all surfaces that have been previously coated with chlorinated rubber, vinyl or acrylic coatings |
| Application Method: | Brush, Roller, Airless Spray or Air Spray |
| Theoretical Coverage: | 10.0m2 per litre for 35µm |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | 35 microns (1.4 mils) |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 30 minutes at 20°C |
| Overcoatable: | Minimum 4 hours at 20°C |
| Fully Cured: | - |
| Cleaner / Thinner: | PPG Thinner 21-06 |
| Shelf Life: | At least 24 months when stored cool and dry |
| Packaging: | Available in 5 Litres and 20 Litres |