PPG SigmaGlide 790

A 2 pack silicone based tie-coat for fouling release systems that can be used on any new build or maintenance project.

Available in 20 Litres in Medium Grey

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£1,200.00

Inc VAT £1,440.00

PRODUCT DETAILS

PPG SigmaGlide 790 is a two component silicone based tie-coat for fouling release systems that can be used on any new build or maintenance project. SigmaGlide 790 is part of a system that works to protect the surface from fouling caused in a marine environment.

Best Uses

Sigmaglide 790 is best used for providing adhesion to SigmaGlide finishes that can be applied over a number of specific systems including ships and appliances that intake sea water.

Application

Sigmaglide 790 can be applied using airless spray to achieve a finish with a theoretical coverage rate of 5-6m2 per litre and produces a semi-gloss, medium grey finish.

Surface and Environment

Sigmaglide 790 can be used in coastal and marine environments, and serves the purpose of protecting vessels and other marine based appliances against fouling. Please feel free to give us a call and find out more information on how this product can be used to best effect.

TECHNICAL

Approvals

NATO Approval No. 8010-99-406-0976

Systems

PPG SigmaGlide 790 is used within the following Sika systems:

PPG 3127 System - SigmaGlide Fouling Release Coating System

See Data Sheets tab for System sheet downloadable PDF.

Notes

Adhesion promoting coating for SigmaGlide Finishes to be applied on top of specific systems

Components:	Two Part
Type:	Silicone Based Tiecoat
Finish:	Semi Gloss
Stock Colours:	Medium Grey
Tintable:	No
VOC Content:	184.0g per Litre
Volume Solids:	79%
Suitable Substrates:	For antifouling
Application Method:	Brush, Roller or Airless Spray
Theoretical Coverage:	5.3 m2 per litre at 150 microns
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):	150 microns
Induction Time:	-
Pot Life:	4 hours at 20°C
Touch Dry:	30 minutes at 20°C
Overcoatable:	After 6 hours at 20°C
Fully Cured:
Cleaner / Thinner:	Do not thin
Shelf Life:	At least 26 months when stored cool and dry
Packaging:	Available in 20 Litres