SKU: ID15723
Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN1263 (Class: 3, Pk Grp: II)

PPG SigmaZinc 105 Primer

A two component, quick drying, anti-corrosive zinc epoxy primer for use onto suitably prepared steel.
Available in 20 Litres
* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
3. Select a Qty
As low as:
£390.00
Inc VAT £468.00
PRODUCT DETAILS

PPG Sigmazinc 105 is a two component, quick drying, anti-corrosive zinc epoxy primer for use onto suitably prepared steel.

Best Uses

PPG Sigmazinc 105 is best used within the infrastructure and power sectors for use on steel at risk of corrosion.

  • Excellent anti-corrosive properties
  • Quick drying, can be over-coated after 25 minutes
  • Excellent application properties
  • Cure at temperatures down to -5°C

Application

Clean steel to blast cleaned to ISO-Sa2.5, blasting profile 40-70 microns. Able to be applied down to -5°C provided that the substrate is free from ice and dry. Ensure the base and hardener tins are above 15°C otherwise extra thinner may be required to obtain viscosity. Thinner should be added after mixing the components.

TECHNICAL

Approvals

This product is the topcoat for the following systems:

  • ISO 12944-6 Systems For Steel - C4 High at 50 microns DFT

Technical Info

Components: Two Components
Type: Epoxy
Finish: Flat
Stock Colours: Grey
Tintable: No
VOC Content: 408.0 g/l
Volume Solids: 65 +/1 2%
Suitable Substrates: Steel: blast cleaned to ISO-Sa2 1/2. blasting profile 40 -70 microns (1.6 - 2.8 mils)
Application Method: Brush, Roller, Airless Spray or Air Spray
Theoretical Coverage: 13.0m2 per litre for 50 microns
Wet Film Thickness (WFT):  
Dry Film Thickness (DFT): 50 - 80 microns depending on system
Induction Time: -
Pot Life: 4 hours at 20°C
Touch Dry: 10 minutes at 20°C
Overcoatable: After minimum 25 minutes to maximum 12 months at 20°C
Dry to Handle: 40 minutes at 20°C
Cleaner / Thinner: Cleaner: PPG Thinner 90-53, Thinner: PPG Thinner 21-06
Shelf Life: At least 12 months when stored cool and dry
Packaging: Available in 20 Litres
Customer Questions
No Questions
Did you find what you were looking for?

RELATED PRODUCTS

Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.