Remmers Epoxy Conductive
Price on Application. Contact our Sales Team for a quotation.
Remmers Epoxy Conductive is a water based transverse conducting layer for Remmers Electro Static dissipative flooring systems.
Best Uses
Remmers Epoxy Conductive is formulated for use as a conducting layer in dissipative Remmers flooring systems such as Remmers SL Floor WHG AS. This transverse conducting layer is electrically dissipative (< 10 kΩ). For professional users only.
Possible System Products:
- Remmers Epoxy WHG Color AS
- Remmers ESD Color 3K
- Remmers Epoxy AS Color
Application
The substrate must be firm, dimensionally stable, capable of bearing loads and free of loose constituents, dust, oil, grease, rubber marks and other substances that could interfere with adhesion. The adhesive pull strength of the surface after priming must be at least 1.5 N/mm² on average (smallest single value min. 1.0 N/mm²), compressive strength at least 25 N/mm². Suitable Remmers epoxy primers, epoxy scratch coats or epoxy mortars must always be used.
Before the application of the product a smooth surface must be produced, e.g. with a scratch coat. Refer to the current Technical Data Sheet for detailed information on the single products. Install earthing elements and copper strands prior to application, based on the size and shape of the surface. Make sure that no point on the surface is more than 10 m from an earthing point or a connected copper strand.
Pour the material onto the prepared surface, spread evenly using a rubber scraper, then roll crossways using a suitable epoxy roller.
Systems
- Remmers SS 356 - ESD Epoxy Self Smoothing Screed System (DFT = 2-3mm)
- Remmers 356WHG - Epoxy Conductive with Excellent Chemical Resistance System (1.5 - 2mm)
See technical tab for downloadable System Sheets.
Technical Info
| Components: | Single Pack |
| Type: | Water based |
| Finish: | |
| Stock Colours: | Black |
| Tintable: | No |
| VOC Content: | <140 g/L |
| Volume Solids: | |
| Suitable Substrates: | Upon suitable Remmers epoxy primers, epoxy scratch coats or epoxy mortars within a system |
| Application Method: | Brush, rubber blade, epoxy roller |
| Theoretical Coverage: | Approx. 0.20 kg/m2 binder (depending on the substrate) |
| Wet Film Thickness (WFT): | |
| Dry Film Thickness (DFT): | |
| Induction Time: | - |
| Pot Life: | 30 minutes at 20°C |
| Foot Traffic: | 4 - 8 hours at 20°C |
| Mechanical Loading: | After 24 hours at 20°C |
| Fully Cured: | 7 days at 20°C |
| Cleaner / Thinner: | Clean tools, equipment and any splashed material immediately with water while still fresh. |
| Shelf Life: | If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 9 months. |
| Packaging: | Available in 10 Kg |
