Selemix 7-410 / 7-412 Epoxy Topcoat
Selemix 7-410 Epoxy Topcoat is a 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.
Please note, the Hardener is not included with this product. Compatible Hardener is Selemix 9-011.
Best Uses
Selemix 7-410 Epoxy Topcoat is recommended for the painting of industrial equipment and machinery, particularly those situated in an aggressive environment. However. Selemix 7-410 should not be used on exterior surfaces exposed to sunlight if a good level of colour stability is required.
- Provides high chemical resistance
- A versatile finish
Application
Prepare bare steel by sanding using P80 - 120 - 240 dry. Suitable for application over Selemix 7-413 or 7-414 Primers. Also suitable for application over sandblasted steel. Degrease substrate thoroughly prior to painting. Combine with compatible hardener and thinner as per data sheet. Apply via airless or conventional spray.
Please note, different gloss levels can be achieved through blending Selemix Epoxy Binder 7-410 Gloss and Selemix Epoxy Binder 7-412 Matt. Please see the Matting Chart for further information.
| Components: | Two Pack |
| Type: | Epoxy Enamel Resin (Hardener sold separately) |
| Finish: | Gloss or Matt |
| Stock Colours: | Just tints |
| Tintable: | Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | |
| Volume Solids: | |
| Suitable Substrates: | Over compatible Selemix primers, base steel or sandblasted steel. |
| Application Method: | Conventional, Airmix Spray, Electrostatic Spray |
| Theoretical Coverage: | 6.8 - 7.6 m2 per litre at 50μm dry film thickness |
| Wet Film Thickness (WFT): | |
| Dry Film Thickness (DFT): | 50 microns |
| Induction Time: | - |
| Pot Life: | 6 - 8 hours at 20°C |
| Dust Free: | 30 - 40 minutes at 20°C |
| Overcoatable: | After 3 hour minimum to 24 hours at 20°C without flatting |
| Thorough Dry: | 1 hour at 20°C |
| Cleaner / Thinner: | Selemix 1-410 or Selemix 1-400 |
| Shelf Life: | |
| Packaging: | Available in 5 and 20 Litres |
Binder Matting Ratios
| Product | Matt | Semi-Matt | Semi-Gloss | Gloss |
| Matt Epoxy Binder 7-412 | 800 | 600 | 500 | - |
| Gloss Epoxy Binder 7-410 | - | 100 | 200 | 700 |
| Selemix NPXX Tinting Bases | 200 | 300 | 300 | 300 |
| Gloss Level (60°) | ||||
| Air Dried over Metal | 10-15% | 40-50% | 75-85% | >90% |
| Air Dried over Primer | 15-20% | 55-65% | 75-85% | >90% |
| Oven Dried over Metal | 20-25% | 50-60% | 80-90% | >90% |
| Oven Dried over Primer | 25-30% | 65-75% | 80-90% | >90% |
| Refer to TDS no: | 522 | 522 | 522 | 520 |
