Selemix 7-649 Fast Dry Synthetic Topcoat

A high gloss, rapid drying finish for application to bare steel.

Available in 5 and 20 Litres. Price on Application. Tintable to most RAL and BS shades.

Out of Stock

PRODUCT DETAILS

Price on Application. Please contact our sales team for a quotation.

Selemix 7-649 Fast Dry Synthetic Topcoat is a high gloss, rapid drying finish for application to bare steel.

Best Uses

Selemix 7-649 Fast Dry Synthetic Topcoat is particularly recommended for agricultural and construction equipment, lifts, and earth moving equipment. Selemix 7-649 should be either applied on top of bare ready steel or Selemix 2.708.080X or 2.708.0900 Primers.

Application

For application via airless spray or conventional spray Selemix 7-649 should be combined with Selemix Thinner 1-215 at a ratio of 4 to 2 - 2.5. Do not use any other thinner. Airless spray equipment should be at 120 - 140 pressure. Conventional spray should be at 3-4 bar pressure.

Application requires 2 coats, allowing for 5 - 10 minutes at 20°C to allow flash off between coats.

TECHNICAL

Components:	Single Pack
Type:	Synthetic
Finish:	High Gloss
Stock Colours:	Just tints
Tintable:	Yes, to most RAL or British Standard codes. Please note, bespoke tints are non-refundable / exchangeable
VOC Content:
Volume Solids:
Suitable Substrates:	On to bare steel or Selemix Primers
Application Method:	Conventional Spray, Airmix Spray, Electrostatic Spray
Theoretical Coverage:	4.5 - 5.5 m2 per litre at 50 microns DFT
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):	40 - 50 microns
Induction Time:	-
Pot Life:	Unlimited
Dust Dry:	10 - 15 minutes at 20°C
Overcoatable:	Between 24 hours and 4 to 5 days at 20°C without flatting
Through Dry:	16 - 24 hours at 20°C
Cleaner / Thinner:	Selemix 1-215
Shelf Life:
Packaging:	Available in 5 and 20 Litres