Selemix Direct Pro 7-15x
Selemix Direct Pro is a versatile, high solids 2-pack acrylic PU finish that can be applied directly to a variety of substrates without the need for a primer.
Direct Pro responds to the industry's evolving expectations for faster curing and shorter process times as well as increased performance while at the same time reducing emissions which therefore gives you a very efficient process.
Best Uses
Selemix Direct Pro has a high gloss finish, good colour and UV stability. Its good anti-corrosive properties make it suitable for the finishing and protection of machinery, agricultural and construction equipment, as well as many other industrial painting applications.
- Corrosion Resistant
- High UV Resistance
- Low Solvent Emissions
- High Quality Finish
- Sag Resistant
Application
Application is by Air-Assisted Airless spray or Conventional spray. Follow product data sheet. Requires incorporation of suitable thinner and hardener sold separately.
Suitable for use with:
Hardeners:
- 9-152 Slow Hardener for Acrylic
- 9-154 Medium Hardener for Acrylic
- 9-158 Fast Hardener for Acrylic
Thinners:
Versions:
- 7-159 - High Gloss
- 7-157 / 7-158 - Semi Gloss
- 7-155 / 7-156 - Satin
- 7-153 / 7-154 - Semi Matt
- 7-151 - Matt
Suitable for use with:
Hardeners:
- 9-152 Slow Hardener for Acrylic
- 9-154 Medium Hardener for Acrylic
- 9-158 Fast Hardener for Acrylic
Thinners:
Technical Info
| Components: | Two Pack |
| Type: | Acrylic Polyurethane Topcoat |
| Finish: | High Gloss, Semi Gloss, Semi Matt, Matt |
| Stock Colours: | Part of SELEMIX® colour system |
| Tintable: | Please contact us for information |
| VOC Content: |
Conventional Spray: 367-407 g/L Air-Assisted Airless Spray: 338-381 g/L |
| Volume Solids: |
Conventional Spray: 55-60% Air-Assisted Airless Spray: 58-63% |
| Suitable Substrates: | Steel (Blast Cleaned), Steel, Galvanised Steel, Aluminium, Painted Surfaces, Epoxy Primer or PU Primer |
| Application Method: | Conventional Spray, Airmix Spray, Electrostatic Spray |
| Theoretical Coverage: |
Conventional Spray:6.1-6.6 m2/L @ 90 microns DFT Air-Assisted Airless Spray: 6.4-7.0 m2/L @ 90 microns DFT |
| Wet Film Thickness (WFT): | 150-175 microns |
| Dry Film Thickness (DFT): | 90-110 microns |
| Induction Time: | - |
| Pot Life: |
Conventional Spray: 2.5 - 3 hours at 20°C Air-Assisted Airless Spray: 1.5 - 2 hours at 20°C |
| Touch Dry: | 8-10 hours (or 5-6 hours with Fast Hardener) |
| Overcoatable: |
Minimum: When Hard Dry Maximum: 1 month by itself without sanding |
| Hard Dry: | 16 hours (or 12-14 hours with Fast Hardener) |
| Cleaner / Thinner: | |
| Shelf Life: | See Tin |
| Packaging: | Available in Various Sizes Dependent on Finish |
