Sika Sikafloor 330

A two part, solvent free, very low VOC emission certified, elastic, self-smoothing PUR resin.

Available in 20 Kg

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£345.96

Inc VAT £415.15

PRODUCT DETAILS

Sika Sikafloor 330 solvent free floor paint reduces footfall sound and protects floors against abrasion and mechanical damage.

Sikafloor-330 is a two component, solvent-free, elasticated, self-smoothing PUR resin floor paint designed for interior use and application to a variety of different substrates. Sikafloor-330 is solvent free and has a very low VOC emission. It has a good resistance to mechanical damage and reduces the sound of footfall, whilst being a low maintenance finish.

Best Uses

Sikafloor-330 is best used in conjunction with Sika Floor 161 Epoxy Primer, ensuring a strong adhesion bond and a surface that is resistant to abrasion and mechanical damage. This product is highly suited for application to floors in hospitals, schools, sales premises, showrooms, entrance halls, lobbies, open-plan offices, museums and other public areas which are exposed to a high level of foot and vehicle traffic.

Application

Sikafloor-330 is an easy to apply product. Using a serrated trowel, to spread evenly and then roll in two directions using a spiked roller, which will ensure an even thickness and remove entrapped air. Once dry, a second seal coat should be applied using a short pile roller. Please read the technical data sheets for full preparation and application methods.

Surface and Environment

Sikafloor-330 can be used over the Sika Floor 161 Epoxy Primer and the Sikafloor Comfort Adhesive. Sikafloor-330 is part of the ComfortFloor and ComfortFloor Pro systems, which are for application to interior concrete substrates, cement screeds and epoxy mortars.

IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu

TECHNICAL

Approvals

Coating for concrete protection according to the requirements of EN 1504-2:2004 and the EN 13813:2002, DoP 02 08 01 04 040 0 000001 1041 certified by Factory Production Control Body, 0620 and provided with the CE-mark.
Fire classification acc. to EN 13501-1, Test reports 08-198 and 08-199, Ghent University
Cleanroom® suitable material as part of the Sika ComfortFloor® and Sika ComfortFloor® Pro systems. Fraunhofer IPA, Germany report no. SI 1008-533
Eurofins Emission tested according to the AgBB-scheme and guidelines of the DiBt (AgBB – Committee for Health-related Evaluation of Building Products, DiBt –German Institute for Building Technology). Sampling, testing and evaluation were performed according to ISO-16000, Reports No. 765863F, 7712844A and 770029B. Impact sound reduction according EN ISO 140-8, test report 102-B-08, iba Institut Gottfried & Rolof Germany.
Determination of wear resistance EN651:2004 , indentation EN 651:2004, castor chair suitability EN425:1994 and effect of simulated movement of furniture leg according EN 424:2002 reports 391575-02 and 391580-02 TFI institute Aachen Germany.

Systems

Sika ComfortFloor PS-63
Sika ComfortFloor PS-65

Technical Info

Components:	Two Part
Type:	Solvent Free, Elastic, Self Smoothing PUR Resin
Finish:
Stock Colours:	Available in 9 Standard approximate RAL colours: RAL 1014, 2000, 3009, 5015, 6010, 7042, 8002, 9001, 9005 The colour of the Sikafloor®-330 has to be approximately adjusted to the colour of the Sikafloor®-305 W
Tintable:	On Request. Please note, bespoke tints are non refundable / exchangable.
VOC Content:	330.0g per Litre
Volume Solids:	100%
Suitable Substrates:	An elastic smooth wearing course for the Sika Comfort-Floor® and Sika ComfortFloor® Pro Systems
Application Method:	Serrated Trowel or Pin Rake
Theoretical Coverage:	1.4 Kg per m2 per mm
Wet Film Thickness (WFT):	See system data sheet
Dry Film Thickness (DFT):	See system data sheet
Induction Time:	-
Pot Life:	15 minutes at 20°C
Touch Dry:
Overcoatable:	Between 16 - 48 hours at 20°C
Fully Cured:	7 days at 20°C
Cleaner / Thinner:	Clean all tools and application equipment with Sika Thinner C immediately after use
Shelf Life:	6 months from date of production
Packaging:	Available in 20 Kg