Teamac High Temp Silicone Aluminium Paint 400°C
Teamac High Temp Silicone Aluminium Paint is a silicone resin based coating designed for resisting heats of up to and including 750°F or 400°C.
Teamac High Temperature Silicone Aluminium Paint is designed for resisting heats of up to and including 750°F or 400°C. Teamac High Temp Silicone Aluminium Paint is a silicone resin based product designed for use on surfaces that are prone to high heat levels.
Best Uses
Teamac High Temp Silicone Aluminium Paint is best used on heating systems and pipes where temperatures reach a high level of 200°C upwards. This Heat Resistant paint provides a decorative coating to aluminium, all the while protecting the substrate from the potential damage that the heat may cause.
Application
Teamac High Temp Silicone Aluminium Paint can be applied using brush, roller or spray to provide a cutting edge coating to metal heating systems. Once applied to the surface, the product will reach full cure when the appliance is heated to over 80°C.
Surface and Environment
Teamac High Temp Silicone Aluminium Paint is designed for use internally or in sheltered areas and can be used on a selection of different surfaces including, aluminium, steel, iron and other metal substrates.
| Components: | Single Pack |
| Type: | High Temp Aluminium |
| Finish: | Satin |
| Stock Colours: | Aluminium |
| Tintable: | No |
| VOC Content: | <600 g/L |
| Volume Solids: | 45% |
| Suitable Substrates: | For fire surrounds, radiators, hot pipes, etc |
| Application Method: | Brush, Roller |
| Theoretical Coverage: | 12 m2 per litre at 20 microns |
| Wet Film Thickness (WFT): | 40 - 80 microns |
| Dry Film Thickness (DFT): | 10 - 20 microns |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 10 - 20 minutes at 20°C |
| Overcoatable: | N/A |
| Hard Dry: | 20 minutes at 220°C |
| Cleaner / Thinner: | Teamac Thinners 16 |
| Shelf Life: | 2 years minimum in original unopened containers. |
| Packaging: | Available in 2.5 Litres |