Tensid PROSOCO Heavy Duty Detergent

Tensid PROSOCO Heavy Duty Detergent is a concentrated formula designed for cleaning heavily stained masonry surfaces and maintenance of surfaces protected with ProSoCo Tile and Masonry Protector or SLX100.

Best Uses

This non acidic detergent is ideal for interior or exterior applications and will not normally affect polished surfaces.

• Removes heavy stains and soiling from masonry surfaces
• Non acidic
• Safe for interior and exterior cleaning

Application

Pretesting
Always test each type of surface and stain before overall application to ensure suitability and desired results. Apply test area according to the following application procedures.

Dilutions
Heavy Duty Detergent may be diluted 1 part concentrate and up to 2 parts water for general applications. Concentrated solutions may be used in areas of extremely heavy staining.

Application Instructions

1. Pre wet the surface with clean water.
2. Apply prepared Heavy Duty Detergent with a soft bristled brush
3. Allow to stand on the surface for up to 30 minutes. Do not allow the material to dry on the surface. If drying begins to occur, mist the surface lightly with clean water
4. Before rinsing, gently scrub the surface until soiling is removed
5. Rinse with clean water. If using a sponge or string mop, change rinse water frequently. Pressure water rinsing may improve results but is not required