Tikkurila Optiva Primer
Tikkuria Optiva Primer is a water-based, acrylic primer for use on new and previously painted interior walls and ceilings.
Best Uses
Tikkurila Optiva Primer is suitable for new and old surfaces, plaster, GRP, dry lining board, and previously painted alkyd coatings. This durable wall primer is suitable for use in London Underground premises below and above ground.
Tikkurila Optiva Primer provides a decrease in absorption of the wall surface while unifies the primed surface ready for the subsequent topcoat. This primer also increases coverage of topcoats from Tikkurila Optiva family.
Application
All surfaces intended for coating must be dry, clean and ready for application. Before painting stir the paint thoroughly and if necessary thin with water, up to 5%. Prime unpainted wall and ceiling surfaces with one coat of Tikkurila Optiva Primer. Application of finishing coat should be performed after min. 4 hours at 23°C.
Approvals and Certifications
- London Underground Approved. LUL APR No.2446 - This is an emulsion paint that is suitable for general use in LU premises including both surface and below ground stations. It is particularly suited for use in staff accommodation.
Technical Info
| Components: | Single Pack |
| Type: | Waterbased |
| Finish: | Matt |
| Stock Colours: | Clear |
| Tintable: | Yes. Please note, bespoke tints are non refundable / exchangable. |
| VOC Content: | 0 g/l |
| Volume Solids: | Min. approx. 50% weight (dependant on colour). |
| Suitable Substrates: | Plaster, GRP, dry lining board, previously painted alkyd coatings. |
| Application Method: | Brush, Roller, Airless Spray |
| Theoretical Coverage: | 6–8 m2 per litre with one coat |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 1 hour at 23°C |
| Overcoatable: | After minimum of 4 hours at 23°C |
| Fully Cured: | - |
| Cleaner / Thinner: | If necessary thin up to 5% with water. |
| Shelf Life: | See packaging |
| Packaging: | Available in 3 Litres and 10 Litres |