Tikkurila Temacoat GPL - S Primer

A rapidly recoatable primer for epoxy and polyurethane systems exposed to abrasion and chemical stress.

Available in 3, 10 and 20 Litres

* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.

2. Size

3. Select a Qty

As low as:

£46.43

Inc VAT £55.72

PRODUCT DETAILS

Tikkurila Temacoat GPL-S Primer is a primer, or an intermediate coat, in epoxy and polyurethane systems which are exposed to abrasion and/or chemical stress.

Best Uses

Temacoat GPL-S Primer is recommended for use on bridges, haulage equipment, cranes, steel masts, conveyors and other steelwork, machinery and equipment. It can be used as an intermediate coat on zinc-rich epoxy and zinc silicate paints.

Application

All surfaces must be clean, dry and fully prepared as per the product data sheet before application. This product should not be applied at temperatures below 0°C where there is a possibility of ice formation on the substrate. Application is by Airless Spray or Brush.

Please Note
Hardener 008 5600 is supplied as the default hardener for this product. If you require an alternative hardener, please enquire before making your purchase.

TECHNICAL

Approvals and Certificates

Temacoat GPL-S Primer has an MED certificate and is therefore accepted for painting the interior of ship surfaces.

Technical Info

Components:	Two Pack
Type:	Solvent Based
Finish:	Matt
Stock Colours:	White
Tintable:	Yes. Please note, bespoke tints are non refundable / exchangeable
VOC Content:	425 g/litre
Volume Solids:	55 ± 2 %
Suitable Substrates:	Cladding, steel, zinc and aluminium
Application Method:	Brush, Airless Spray
Theoretical Coverage:	9m2 per litre at 70 microns
Wet Film Thickness:	110 μm
Dry Film Thickness:	60 μm
Induction Time:	-
Pot Life:	6 hours at 23ºC with Hardener 008 5600
Touch Dry:	2.5 hours at 23°C with Hardener 008 5600
Overcoatable:	2 hours at 23°C with epoxy paints 6 hours at 23°C with polyurethane paints
Fully Cured:	-
Cleaner / Thinner:	Tikkurila Thinner 1031
Shelf Life:	See packaging
Packaging:	Available in 3 Litres, 10 Litres and 20 Litres