Sherwin Williams Transgard TG110 - Formerly Leighs
Sherwin Williams Transgard TG110 - Formerly Leighs is a zinc phosphate pigmented 2 pack epoxy, temporary protective primer for steel surfaces.
Best Uses
Transgard TG110 is best used as a temporary protective for steel surfaces prepared by abrasive blast cleaning. Suitable for use in conjunction with cathodically protected steel. Suitable for fabrication and for overcoating with most paints in common use except high content metallic zinc products
Application
Recommended application method via airless spray, conventional spray, roller or brush for small areas or touch up only. For optimum performance use round steel shot and blast clean to Sa2½ BSEN ISO 8501-1:2007). Average surface profile in the range 30-50 microns. Ensure surfaces to be coated are clean, dry and free from all surface contamination.
Recommended cleanser / thinner Sherwin Williams Thinner C5. Indefinitely overcoatable with epoxy systems provided the surfaces to be coated have been suitably cleaned.
Approvals:
- Highways Agency Item No. 110
Technical Info:
| Components: | Two Pack |
| Type: | Zinc Phosphate Primer |
| Finish: | - |
| Stock Colours: | Cinnamon |
| Tintable: | No |
| VOC Content: | 584 gms/litre |
| Volume Solids: | 36± 2% |
| Suitable Substrates: | Steel |
| Application Method: | Brush, Roller, Airless Spray or Conventional Spray |
| Theoretical Coverage: | 14.4 m2/ltr* |
| Wet Film Thickness (WFT): | 70 microns |
| Dry Film Thickness (DFT): | 25 microns |
| Induction Time: | - |
| Pot Life: | 8 hours at 23°C |
| Touch Dry: | 20 minutes at 23°C |
| Overcoatable: | 4 hours at 23°C |
| To Handle: | 2 hours at 23°C |
| Cleaner / Thinner: | Cleanser Thinner:No 5 |
| Shelf Life: | 12 months from date of production unopened or 'use by' date where specified |
| Packaging: | Available in 5 Litres |