SKU: ID3623
Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN2735 (Class: 8, Pk Grp: III)

Coo-Var Q124 Dampshield

A clear gas permeable damp proof membrane, For screeds, coatings and other floor coverings such as carpet, vinyl and wood.
Available in 5 Kg
* These colours are for guidance only. Variations between output devices can misrepresent the appearance of an actual colour. Also, we strongly advise that you order your complete paint requirements simultaneously to ensure a uniform batch colour.
3. Select a Qty
As low as:
£129.61
Inc VAT £155.53
PRODUCT DETAILS

Coo-Var Q124 Dampshield can be used as a primer on masonry, swimming pools as well as being a floor sealant for floor coverings such as carpet, vinyl and wood.

Coo-Var Q124 Dampshield is a 2 pack floor sealer, formulated with a damp proof membrane (DPM) that is suitable for screeds, coatings and other floor coverings such as carpet, vinyl and wood and also works as a suitable primer for use on masonry swimming pools.

Best Uses

Coo-Var Q124 Dampshield is a gas permeable damp proof membrane that can be used for earlier access than would otherwise be available for screeds, coatings and other floor coverings such as carpet, vinyl and wood.

Application

Coo-Var Q124 Dampshield can be applied using a roller to produce a clear gloss finish on floors, with a drying time of 24 hours. Coo-Var Q124 Dampshield can be over coated after 12-24 hours for a more protective surface, with a theoretical coverage rate of 20m2 per unit. Damp shield is available in 5kg containers.

Surface and Environment

Coo-Var Q124 Dampshield can be used as a primer on masonry swimming pools as well as being a floor sealant for floor coverings such as carpet, vinyl and wood.

TECHNICAL
Components: Two Part
Type: Resin Membrane
Finish: Gloss
Stock Colours: Clear
Tintable: No
VOC Content: 10.0g per Litre
Volume Solids: 100%
Suitable Substrates: For concrete floors and fine concrete screeds
Application Method: Lambswool Roller
Theoretical Coverage: 20 m2 per 5 Kg pack
Wet Film Thickness (WFT): 230 microns
Dry Film Thickness (DFT): 230 microns
Induction Time: -
Pot Life: 30 minutes at 20°C
Touch Dry: -
Overcoatable: After 12 hours at 20°C
Fully Cured: 5 - 7 days at 20°C
Cleaner / Thinner: Teamac Thinners 16
Shelf Life: 2 years unopened in original container
Packaging: Available in 5 Kg
Customer Questions
No Questions
Did you find what you were looking for?

RELATED PRODUCTS

Navigating through the elements of the carousel is possible using the tab key. You can skip the carousel or go straight to carousel navigation using the skip links.