Coo-Var Q228 Oil Tolerant Primer
Coo-Var Q228 Oil Tolerant Primer is a two pack, epoxy product, part of Promain's fantastic range of Primers, Thinners and Cleaners designed for use on floors contaminated with oil and grease.
Best Uses
Coo-Var Q228 Oil Tolerant Primer is ideal for use on garage and industrial floors that have some form of oil contamination. Coo-Var Q228 Oil Tolerant Primer covers the stain and works to protect the surface against further staining.
Application
Coo-Var Q228 Oil Tolerant Primer can be applied by brush, roller or trowel edge and can be applied on substrates with hygrometer readings up to 85% RH. Coo-Var Q228 Oil Tolerant Primer is available in 4kg units and has a theoretical coverage rate of 4m2 per kg.
Surface and Environment
Coo-Var Q228 Oil Tolerant Primer can be used on concrete floors and fine concrete screeds with a thickness of 50mm or more. Coo-Var Q228 Oil Tolerant Primer works to improve the adhesion of over coatings to substrates that have been thoroughly cleaned but may still have some form of contamination.
| Components: | Two Components |
| Type: | Epoxy Resin |
| Finish: | Off-Gloss |
| Stock Colours: | Clear |
| Tintable: | No |
| VOC Content: | Max 10 g/l |
| Volume Solids: | 100% |
| Suitable Substrates: | Ideal for concrete floors and screeds with residual oil contamination |
| Application Method: | Roller (short to medium pile) |
| Theoretical Coverage: | 16 m2 / 4 kilo pack at recommended dry thickness |
| Wet Film Thickness (WFT): | 220 microns |
| Dry Film Thickness (DFT): | 220 microns |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 24 hours at 20°C |
| Overcoatable: | After minimum 24 hours at 20°C |
| Fully Cured: | n/a |
| Cleaner / Thinner: | Thinner: n/a, Cleaner: Thinners 16 (Brushwash only) |
| Shelf Life: | - |
| Packaging: | Available in 4 Kg |