Hempel Hempadur Avantguard 770
Hempadur Avantguard 770 is an activated zinc-rich epoxy primer in compliance with the requirements of Level 2, type II in SSPC Paint-20, 2019 and ISO 12944 Part 5, 2018. The product is in full compliance with ASTM D520 type II and EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory j.
Best Uses
Hempadur Avantguard 770 is best used as a versatile primer for the long-term protection of steel in severely corrosive environments. It is particularly suitable for use in maintenance and offshore environments. Avantguard 770 reduces the effect of corrosion whilst providing excellent galvanic protection. It is fast drying and has short minimum overcoating intervals.
- Reduces the effect of corrosion and provides excellent galvanic protection
- Dries fast and has short minimum overcoating intervals
- Excellent mechanical strength, also in cyclic temperatures, with improved tolerance to high dry film thickness through high flexibility and self-healing effect
- Superior tolerance to high relative humidity during application
- Cures down to -10°C [14°F]
Application
The recommended application method is by Airless Spray. Always ensure the surface is fully prepped prior to application. Remove oil, grease and other contaminants by cleaning with suitable detergents. Any salts, detergents and other contaminants should be removed by high pressure fresh water cleaning.
New Builds
Abrasive blasting to min. Sa 2½ (ISO 8501-1) / SP 10 (SSPC). Remove dust, blast media and loose materials.
Maintenance and Repair
Abrasive blasting to min. Sa 2 (ISO 8501-1) / SP 6 (SSPC). Water jetting to Sa 2½ (ISO 8501-4). Flash rust degree of maximum FR M (ISO 8501-4). Feather edges to sound surrounding coating. Minor areas can be cleaned by power tool to St 2 provided the surface is roughened and not polished. Minor areas can be cleaned by power tool to St 3 provided the surface is roughened and not polished. Remove dust, blast media and loose materials.
Roughness
Surface profile Medium (G) (ISO 8503-2).
A complete application guide can be downloaded from the data sheets tab.
Certificates & Approvals
- Meets requirements to ISO 12944 when used as part of a predefined paint system. Part 9 CX.
- Meets requirements to NORSOK M-501 when used as part of a predefined paint system. Edition 6, System 1, 7A, 7B. Edition 7,System 1B
Technical Info
| Components: | Two Pack |
| Type: | Zinc-rich epoxy primer |
| Finish: | Flat |
| Stock Colours: | Grey 10830 |
| Tintable: | No |
| VOC Content: | 328 g/L |
| Volume Solids: | 66 ± 2% |
| Suitable Substrates: | Steel |
| Application Method: | Airless Spray |
| Theoretical Coverage: | 11 m²/L |
| Recommended Wet Film Thickness (WFT): | 91µm |
| Recommended Dry Film Thickness (DFT): | 60µm |
| Induction Time: | - |
| Pot Life: | 7 hours at 20°C |
| Touch Dry: | 15 minutes at 20°C |
| Hard Dry: | 2.5 hours at 20°C |
| Overcoatable: | 45 minutes at 20°C |
| Cleaner / Thinner: | Hempel's Tool Cleaner 99610 |
| Shelf Life: |
Base: 12 months from date of production unopened Curing Agent: 36 months from date of production unopened |
| Packaging: | Available in 10 Litres |