Hempel Topcoats

A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved No.169.

Suitable for use as a finishing coat for protection of structural steel.

A two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability.

A 2 pack semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

A self-priming, 2 pack, high build, pure epoxy paint which cures to an abrasion and corrosion resistant coating.

A primer, intermediate or finishing coat in Hempatex systems in moderately corrosive environment.

A self-priming, two-component, high-build, pure epoxy paint.

A two-component epoxy paint, which cures to a hard and tough coating.

A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.

A 2 pack, high-gloss acrylic polyurethane enamel with good gloss and colour retention.

A finishing coat based on acrylic resin and non chlorinated plasticizer for optimum gloss and colour retention.

A high build epoxy coating for the protection of metal substrates against atmospheric corrosion. Network Rail Approved.

A self-priming, two-component, high build epoxy paint containing zinc phosphate.

An intermediate or finishing coat epoxy system for use in atmospheric exposures. Highways No.112

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

A 2 pack epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate.

A 2 pack, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.

A water-borne, acrylic dispersion based paint for interior and exterior moderate to sever corrosive environments.

A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.

2 pack polyamide-adduct epoxy paint. A protective coating to steel & metal surfaces in severely corrosive environments.

Glossy, general purpose topcoat. For mildly to moderately corrosive environment. For exterior and interior usage.

A quick drying, anti-corrosive finishing coat for steel.

A quick drying topcoat for steel, with excellent colour retention.

An ultra high solids and very low VOC epoxy coating.

A two component polyurethane paint with good gloss retention and colour stability.

A high build epoxy paint suited for application at low temperatures.